废塑料热解特性研究

采用热重分析法及差示扫描量热法,在氮气气氛下分别以5,10,15,20℃/min的升温速率对四种废弃塑料(PP、PS、PE、PET)热解过程及其动力学进行了研究。实验结果表明:四种塑料聚合物的非等温热解只有1个剧烈失重阶段,热稳定性的排序为:PSPETPPPE。随升温速率的提高,塑料的最大热解速度线性减小,对应的峰值温度线性升高,失重率基本不变。聚合物的热解机理满足一级反应动力学方程,且随着升温速率的提高,其活化能(E)和指前因子(A)线性增大,ln A与E之间存在近似的线性关系。     

Modeling Smart Grid neighborhoods with the ENERsip ontology

The electricity consumption in the buildings sector has been steadily increasing during the last decade, up to the point that energy efficiency in this sector has become a major problem for governments, utilities, customers, and the environment. The foreseen high penetration of distributed micro-generation facilities based on renewables can help to reduce the environmental footprint of buildings and households, although the complexity of managing effectively the electric grid increases dramatically under these conditions. The IEEE 2030 standard for interoperability in the Smart Grid remarks upon the importance of well-defined data models in such complex scenarios and puts emphasis on the benefits of ontologies and OWL (Web Ontology Language) for this purpose. This paper presents an OWL-based ontology that formally defines the vocabulary and taxonomy and captures the engineering and business semantics of this domain of knowledge (i.e., energy efficiency in the so-called nZEN – nearly Zero-Energy Neighborhoods). This ontology has been defined under the scope of the EU (European Union) research project ENERsip. The paper also highlights the main benefits the ontology brought to all the phases of the project life cycle, as well as how future work can make the most out of it.     

Crosstalk-aware multi-bit flip-flop generation for power optimization

Applying multi-bit flip-flops (MBFFs) for clock power reduction in modern nanometer ICs has been becoming a promising lower-power design technique. Many previous works tried to utilize as more MBFFs with larger number of bits as possible to gain more clock power saving. However, an MBFF with larger number of bits may lead to serious crosstalk due to the close interconnecting wires belonging to different signal nets which are connected to the same MBFF. This paper analyzes, evaluates, and compares the relationship between power consumption and crosstalk when applying MBFFs with different numbers of bits. To solve the addressed problem, a novel crosstalk-aware power optimization approach is further proposed to optimize power consumption while satisfying the crosstalk constraint. Experimental results show that the proposed approach is very effective in crosstalk avoidance when applying MBFFs for power optimization.     

Sexual self-presentation on social network sites: Who does it and how is it perceived?

The aims of this study were to investigate (a) the role of peer factors in adolescents’ sexual self-presentation on social network sites, and (b) how adolescents who present themselves sexually online are evaluated by others. 238 high school students (aged 12–18) evaluated either a sexual or non-sexual online presentation of same-sex and opposite-sex peers. Moreover, they filled in a questionnaire about their own self-presentation behavior. Findings showed that peer norms played a crucial role in whether adolescents posted sexual pictures of themselves online. Moreover, need for popularity was a strong predictor for posting such pictures. Girls who presented themselves in sexual ways were evaluated more negatively by other girls but more positively by boys. Similarly, boys who presented themselves in sexual ways were evaluated more positively by girls but not by boys.     

A new catalyst based on a nickel(II) complex of diiminodiphosphine for hydrogen evolution and oxidation

Based on that hydrogen energy is widely used in fuel cells, we focus our interests on the design and research of new complexes that catalyze the reaction in both directions, such as hydrogen evolution reactions (HERs) and hydrogen oxidation reactions (HORs). A highly efficient catalyst for both hydrogen evolution and oxidation, based on a nickel(II) complex, [Ni-en-P₂](ClO₄)₂, has been designed and provided by the reaction of Ni(ClO₄)₂ with N,N′-bis[o-(diphenylphosphino)benzylidene]ethylenediamine (en-P₂) in our group. Its structure has been determined by X-ray diffraction. [Ni-en-P₂](ClO₄)₂ can electro-catalyze hydrogen evolution both from acetic acid and a neutral buffer (pH 7.0) with a turnover frequency (TOF) of 204 and 1327 mol of hydrogen per mole of catalyst per hour (H₂/mol catalyst/h) under an overpotential (OP) of 914.6 mV and 836.6 mV, respectively. [Ni-en-P₂](ClO₄)₂ also can electro-catalyze hydrogen oxidation with a TOF of 111.7 s⁻¹ under an OP of 330 mV. The results can be attributed to that [Ni^II-en-P₂](ClO₄)₂ has three good reversible redox waves at 1.01 (Ni^III/II), −0.79 (Ni^II/I) and −1.38 V (Ni^I/0) versus Fc^+/0, respectively. We hope these findings can afford a new method for the design of electrocatalysts for both H₂ evolution and H₂ oxidation.     

自动多功能可调式便老轮椅的设计

针对老年人群体设计一种自动可调式轮椅，轮椅靠背通过不完全齿轮机构进行自动调整。靠背竖起可作为普通轮椅使用；靠背放平可实现平躺，可通过靠背和座椅安置的滚轴实现从轮椅到床和沙发等位置的移动。该轮椅工作稳定，性能可靠，功能实现效果较好。     

Polymer derived ceramic materials from Si,B and MoSiB filler-loaded perhydropolysilazane precursor for oxidation protection

Silica-based coating systems were developed using polymer derived ceramics (PDCs) technology. Ceramic composites on the base of a SiO₂ and SiNO matrix and homogeneously distributed Mo₅SiB₂, SiB₆, Si and B fillers were manufactured. The coating systems have low porosity and provide a high oxidation resistance up to 100 h at 800 °C and 1100 °C in air. The influence of temperature and atmosphere of pyrolysis on the polymer precursor, the volume fraction of filler materials on the chemical composition of compacts as well as their high-temperature oxidation protection was investigated.     

快速进出水煤浆用调配罐的设计与应用

水煤浆是一种煤基流体燃料,是煤炭深加工的新型产品之一。它既是一种新型洁净的环保材料,又具有良好的流动性,因此得到了广泛的使用。设计了一种快速进出水煤浆用调配罐,从而使得水煤浆进出调配罐效率提高,较好的解决了水煤浆制备过程中出现的问题,具有极佳的推广意义。     

Wet abrasive wear behavior of WC-based cermet coatings prepared by HVOF spraying

In this study, three kinds of WC-based cermet coatings including WC–CoCr coating, WC–Ni coating and WC–Cr₃C₂–Ni coating were prepared by the high-velocity oxygen-fuel (HVOF) spraying process. Scanning electron microscopy (SEM), energy disperse spectroscopy (EDS) and Vickers hardness tester were used to analyze the microstructure and mechanical properties of these coatings. The WC–CoCr coating presented the highest average microhardness of 1205 HV_0.3, and then followed by the WC–Cr₃C₂–Ni coating (1188 HV_0.3) and the WC–Ni coating (1105 HV_0.3). The abrasive wear behavior of the WC-based coatings under the conditions of different applied loads and sediment concentrations were studied by a wet sand-rubber wheel tester. The results indicated that the abrasive wear loss rates of all the coatings increased with the increment of applied load or sediment concentration. In addition, the coatings with higher microhardness appeared to have higher abrasive wear resistance. The abrasive wear resistance of the WC-based coatings was 4–90 times higher than that of AISI 304 stainless steel under the same testing condition. The abrasive wear mechanism of the WC-based coatings was deduced to be the extrusion and removal of binder phases, as well as the fragmentation and peel-off of hard phases.     

SiC nanoparticles incorporation in electroless NiP-Graphene oxide nanocomposite coatings

The presence of SiC nanoparticles within the Graphene oxide (GO) incorporated electroless deposited NiP layers (NiP-GO) on carbon steel substrate was studied in this work. The effect of co-deposition of GO nanoplatelets and/or SiC nanoparticles on the morphology and structure of the heat-treated NiP coatings were investigated by scanning electron microscope and X-ray diffraction, respectively. The results revealed that the heat-treated NiP and NiP–SiC coatings consisted of Ni and Ni₃P phases, whereas the NiP-GO also contains the intermediated Ni₂P and Ni₁₂P₅ metastable phases due to the incomplete precipitation of Ni₃P. Such metastable phases are significantly decreased by the incorporation of SiC nanoparticles in NiP-GO coatings. The mechanical properties of the coatings were characterized by microhardness measurement and “pin on disk” wear test. The corrosion tests were conducted in aqueous 3.5 %wt NaCl using electrochemical measurement for Ni–P, NiP-GO, NiP–SiC, and NiP-GO-xSiC coatings. By co-deposition of SiC nanoparticles, the hardness of NiP-GO is significantly increased and the wear loss is reduced, especially at a high sliding distance during the wear test. The corrosion behavior of the NiP-GO coatings containing different amounts of SiC nanoparticles has been investigated.